|
|
| 11.1V Li-Ion Rechargeable Batteries
Example:- 11.1 volt - 700mAh 15C Li-Poly Pack
Features - 3 cell Lithium Polymer 700mAh battery pack. - 15C continuous discharge rate of 10.5 amps with 14 amp bursts in accordance with our Real Flight Rating method. - Maximum charge rate 0.7 Amps. - Dimensions: 21mm x 36mm x 68mm - Weight: 65 grams - Please see our Real Flight Rating method that describes more specific use of burst discharge rates with our Li-Poly cells.
|
|
|
| 14.8V Li-Ion Rechargeable Batteries
Example:- 14.8 volt 4000mAh 15C - 60+ amp Brick Style
Features- This 4S2P Brick Style"Big Pack" is built from our 2000mAh - 15c cells. - It is rated and has been tested at 60 amps continuous discharge with burst capability of 80 amps for 5 seconds every 30 seconds. - Dimensions: 50mmx73mmx72mm - Weight: 455 grams
|
|
|
| 18.5V Li-Ion Rechargeable Batteries
Example:- 18.5 volt 4000mAh 15C - 60+ amp
Features- This 5S2P Stick Style "Big Pack" is built from our 2000mAh - 15c cells. - It is rated and has been tested at 60 amps continuous discharge with burst capability of 80 amps for 5 seconds every 30 seconds. - Dimensions: 20mm x 50mm x 350mm - Weight: 662 grams
|
|
|
| 22.2V Li-Ion Rechargeable Batteries
Example:- 22.2 volt 4000mAh 15C - 60+ amp
Features- This 6S2P Stick Style "Big Pack" is built from our 2000mAh - 15c cells. - It is rated and has been tested at 60 amps continuous discharge with burst capability of 80 amps for 5 seconds every 30 seconds. - Dimensions: 36mm x 50mm x 215mm - Weight: 686 grams
|
|
|
| 29.6V Li-Ion Rechargeable Batteries
Example:- 29.6 volt 4000mAh 15C - 90+ amp
Features- This 8S2P Stick Style "Big Pack" is built from our 2000mAh - 15c cells. - It is rated and has been tested at 60 amps continuous discharge with burst capability of 80 amps for 5 seconds every 30 seconds. - Dimensions: 37mm x 50mm x 280mm - Weight: 975 grams
|
|
|
| 3.0V Li-Ion Rechargeable Batteries
Example:- 4 Pcs RCR123A 3.0V 650mAh Rechargeable Li-Ion Battery
- Rechargeable CR123A Li-Ion Batteries with 3.0V working voltage and 650mAh capacity.- Tenergy RCR123A can be recharged up to 1000 times. 1 RCR123A Li-ion = 1000 CR123A Primary Cells- Replace the most of CR123A primary Lithium battery for a digital camera
|
|
|
| 3.6V Li-Ion Rechargeable Batteries
Example:- 4 Li-Ion 18500 Rechargeable 3.6V 1300mAh
Features - Lithium Ion 18500 cylindrical rechargeable battery - 3.6V 1300mAh high capacity, 3 times the Voltage of AA NiMH or NiCd rechargeable battery (1.2V) - Higher energy density and lower weight than other types rechargeable batteries - Ideal for building power packs for RC Car, plane, robots etc with less cells needed than that for NiMH or NiCd batteries. - Manufactured under ISO9001-2000 to assure quality - Battery tested based on International Electrotechnical Commission (IEC) standard to ensure capacity, quality and life time Applications - RC Applications, car, plane etc. - Safety, Alarm, metering, power backup etc. - Building portable power device needing high energy density and low weight Cautions - Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode if mis-handled. - Make sure user has enough knowledge on Li-Ion rechargeable batteries in charging, discharging and assembly before use. - We are not responsible for any damage caused by misuse or mishandling of these Li-Ion batteries Product Specifications - Capacity: Nominal 1300 mAh - Dimensions: Diameter 18mm Height 50mm - Weight (Typical) Approx. 34 g - Nominal Working Voltage: Average 3.6V - Peak Voltage: 4.2V - Discharge Cut-off Voltage: 2.75V - Internal Resistance: <80 mOhm - Cycle Performance: 85% of initial capacity at 300 cycles - Cycle life: > 300 cycles - Max. Charging current: 1C or 1.3A - Max. Discharging current 1.9C or 2.4A (for continuous discharge)
|
|
|
| 3.7V Li-Ion Rechargeable Batteries
Example:- 36 pcs of Li-Ion 18650 3.7V 2000 mAh rechargeable batteries (Free Shipping)
Features - Lithium Ion 18650 cylindrical rechargeable batteries - 3.7V 2000mAh high capacity - Higher energy density and lower weight than other types rechargeable batteries - Manufactured under ISO9001-2000 to assure quality - Internal PCB protects against under and over charging- low voltage 2.8, high voltage 4.2. - Battery tested based on International Electrotechnical Commission (IEC) standard to ensure capacity, quality and life time Applications - Building Laptop Battery - Building portable power device needing high energy density and low weight Cautions - Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode if mis-handled. - Make sure user has enough knowledge on Li-Ion rechargeable batteries in charging, discharging and assembly before use. - We are not responsible for any damage caused by misuse or mishandling of these Li-Ion batteries Product Specifications - Capacity* Nominal 2000 mAh, Minimum 1950 mAh - Dimensions: Diameter 18+/- 0.2 mm Height 68+/- 0.2mm - Weight (Typical) Approx. 46 g yes - Nominal Voltage: Average 3.7V - Cut-off Voltage: 3.0V - Internal Impedance: less or equal to 180 milliohm (with PTC) - Cycle Performance: 90% of initial capacity at 400 cycles - Cycle life: > 500 cycles - Charge: Current = 0.5C mA Voltage = 4.2 V End Current = 0.01 mA - Discharge: Current = 0.5C mA End Voltage = 3.0V - Max. Charging current: 1.5C ma - Max. Discharging current 1.5C ma (for continuous discharge)
|
|
|
| 37V Li-Ion Rechargeable Batteries
Example:- 37 volt 4000mAh 15C - 60+ amp
Features- This 10S2P "Big Pack" is built from our 2000mAh - 15c cells. - It is rated and has been tested at 60 amps continuous discharge with burst capability of 80 amps for 5 seconds every 30 seconds. - Dimensions: 40mm x 50mm x 350mm - Weight: 1200 grams
|
|
|
| 7.2V Li-Ion Rechargeable Batteries
Example:- Li-Ion 18650 7.2V 2000 mAh Rechargeable Battery module
Features - High quality 7.2 V Li-Ion rechargeable battery pack - Made of 2 2000mAh cylindrical 18650 cells with PCB and poly switch for full protection - Light weight and higher energy density than any rechargeable battery - No memory effect and rechargeable - Longer storage life than NiMH battery - You can build 7.2V/4.0Ah Li-Ion battery pack by connecting two or three PCB ready battery module in parallel . - Built-in IC chip will prevent battery pack from over charge and over discharge and prolongs battery life - Perfect for building 7.2V battery pack for bike lighting, RC toy (cars and airplanes), robots, cameras, DVD external battery. Technical Specs | Capacity | 2000mAh | | Voltage | 7.2V | | Dimensions | 1.4 x 0.6 x 2.5 inch | | Weight | 6.0 oz | | Max. charge current | 1C (2.0A) | | Max. discharge current | 2.5C (5A) | | Cut off voltage | 6V |
Cautions - Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode if mis-handled. - Make sure user has enough knowledge on Li-Ion rechargeable batteries in charging, discharging and assembly before use. - We are not responsible for any damage caused by misuse or mishandling of these Li-Ion batteries - Strongly suggest that you use our smart Li-Ion battery charger to recharge the battery pack - Never use conventional DC adapter to charge the battery module) We are NOT responsible for any damage that is caused by the misuse of the Li-Ion Battery - Please don't make parallel connection with more than two modules to avoid uneven charge.
|
